Installing replacement mobile home diamond window

In a combo door :

• Insert glazing side of window into hole on exterior (pan side without lip) side of door
• Recommend laying door on flat surface with glazing side of window underneath for support
• Insert non-glazed side into hole on interior (lid side with lip) side of door
• Tap one corner at a time with a soft rubber hammer to seat corners
• Finish installing by tapping around entire window frame until it is flush with the door

In a single outswing door :

• Insert glazing side of window into hole on exterior (lid side with lip) side of door
• Recommend laying door on flat surface with glazing side of window underneath for support
• Insert non-glazed side into hole on interior (pan side without lip) side of door
• Tap one corner at a time with a soft rubber hammer to seat corners
• Finish installing by tapping around entire window frame until it is flush with the door

Removing window from a mobile home diamond door

On a combo door :

• Use a small flathead screwdriver to push between vinyl frame and glass on interior (lid side with lip) side of door.
• Twist screwdriver to break glazing.
• Pull vinyl frame away from door.

On a single outswing door :

• Use a small flathead screwdriver to push between vinyl frame and glass on interior (pan side without lip) side of door.
• Twist screwdriver to break glazing.
• Pull vinyl frame away from door.

Buy this replacement diamond window for your door :